CHEMICAL COMMODITIES AGENCY -- EPOXY RESIN PART A  -- 8040-00-858-9798
<pre>=====================  Product Identification  =====================

Product ID:EPOXY RESIN PART A
MSDS Date:06/13/1989
FSC:8040
NIIN:00-858-9798
Kit Part:Y
=== Responsible Party ===
Company Name:CHEMICAL COMMODITIES AGENCY
Address:27447 PACIFIC STREET
City:HIGHLAND
State:CA
ZIP:92346-2699
Country:US
Info Phone Num:714-864-2310
Emergency Phone Num:714-864-2310
CAGE:60777
=== Contractor Identification ===
Company Name:CHEMICAL COMMODITIES AGENCY, INC.
Address:27447 PACIFIC STREET
Box:City:HIGHLAND
State:CA
ZIP:92346-2640
Country:US
Phone:909-864-2310
CAGE:60777

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXY RESIN
Fraction by Wt: >10%
Other REC Limits:NONE SPECIFIED

Ingred Name:KAOLIN
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: >10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Effects of Overexposure:EYES: DIRECT CONTACT WITH THE PRODUCT MAY CAUSE
    IRRITATION. SKIN: EPOXY RESINS ARE POTENTIAL DERMAL SENSITIZERS.
    INHALATION: INHALATION IS NOT A ROUTE OF EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH IMMEDIATELY WITH WATER FOR 15 MINUTES. CONSULT A
    PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH AFFECTED AREA WITH
    SOAP AND WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
    DIOXIDE.
Fire Fighting Procedures:PERSONS EXPOSED TO PRODUCTS OF COMBUSTION
    SHOULD WEAR SELF CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE
    EQUIPMENT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
    MATERIAL. RESIDUE MAY BE REMOVED WITH A CHLORINATED SOLVENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:APPROPRIATE PROTECTIVE CLOTHING.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Viscosity:90,000 CPS

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT ESTABLISHED.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
    MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS PRODUCT DOES NOT MEET THE DEFINITION OF
    HAZARDOUS WASTE. UNDER 40 CFR DISPOSE OF IN ACCORDANCE WITH STATE
    AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.